Anycubic 3D Printers

Anycubic is a 3D printer brand whose homepage highlights both filament (Kobra) and resin (Photon) machines. The Kobra line covers multi-color FDM: the Kobra X is described with 4-color built-in and up to 19-color maximum plus soft and hard multi-material printing; the Kobra 3 Max V2 Combo comes standard with ACE 2 Pro for 8-color printing and a full-metal hotend; the Kobra 4 Combo lists 8-color printing with 65℃ active drying while printing; and the Kobra S1 ACE 2 Pro Combo prints up to 16-color. Larger FDM builds appear as the Kobra S1 Max Combo at 350×350×350mm³ with 65℃ active chamber heating and a fully-enclosed CoreXY system, and the Kobra 3 Max V2 Combo at 420*420*500mm. On the resin side, the Photon P1 Max lists an 18.3L print volume, a precision-ground steel build plate and 92% light uniformity; the Photon P1 lists the same steel build plate, light uniformity above 92% and Wave Release Technology. The homepage also links to Makeronline for sharing prints.

Anycubic is a 3D printer brand whose homepage highlights both filament (Kobra) and resin (Photon) machines. The Kobra line covers multi-color FDM: the Kobra X is described with 4-color built-in and up to 19-color maximum plus soft and hard multi-material printing; the Kobra 3 Max V2 Combo comes standard with ACE 2 Pro for 8-color printing and a full-metal hotend; the Kobra 4 Combo lists 8-color printing with 65℃ active drying while printing; and the Kobra S1 ACE 2 Pro Combo prints up to 16-color. Larger FDM builds appear as the Kobra S1 Max Combo at 350×350×350mm³ with 65℃ active chamber heating and a fully-enclosed CoreXY system, and the Kobra 3 Max V2 Combo at 420*420*500mm. On the resin side, the Photon P1 Max lists an 18.3L print volume, a precision-ground steel build plate and 92% light uniformity; the Photon P1 lists the same steel build plate, light uniformity above 92% and Wave Release Technology. The homepage also links to Makeronline for sharing prints.

Suppose you want to print a batch of multi-color desk organizers taller than a small FDM bed, and you would rather let an automated unit handle color changes than swap filament by hand. The Kobra 3 Max V2 Combo is listed with a 420*420*500mm print volume and a standard ACE 2 Pro for 8-color printing, so both the size and the color workflow appear in the official listing. The documented constraint is that multi-color capability is tied to the ACE 2 Pro unit and the listed color counts, so your design must fit within those color slots and the stated build volume. Adoption check: (1) measure your tallest part and compare it with the listed build volume; (2) count the distinct filament colors in your model and compare with the listed color count for the machine you are considering; (3) confirm the model's material and nozzle needs against the listed hotend and drying features; (4) slice a test part and check that the color changes fall where you expect. Observable result: the sliced preview shows the intended colors on the intended layers and the part fits inside the listed build volume. If either check fails, the documented workflow does not match your project and you should look at a different listed model or split the part.